How Do You Spell FIRING ANGLE?

Pronunciation: [fˈa͡ɪ͡əɹɪŋ ˈaŋɡə͡l] (IPA)

The correct spelling of the word "firing angle" is /ˈfaɪrɪŋ ˈæŋɡəl/. The phonetic transcription shows that the first syllable is pronounced as "fire" with the long "i" sound, followed by the stressed syllable "ing" which is pronounced with the "ng" sound. The second word "angle" is pronounced with a short "a" sound, followed by "ng" and "l" sound. This term is commonly used in electrical engineering and refers to the angle between the voltage and current waveforms in an AC circuit.

FIRING ANGLE Meaning and Definition

1. The term "firing angle" refers to a crucial aspect of electrical energy control in alternating current (AC) circuits. It specifically pertains to the angle at which a thyristor, also known as a silicon controlled rectifier (SCR), is triggered to conduct the AC power waveform. As a controllable electronic switch, the thyristor allows the current to flow only when it is triggered by a suitable firing signal.

   The firing angle is measured in degrees and represents the delay between the zero crossing of the AC voltage waveform and the firing of the thyristor. This angle determines the portion of the AC cycle during which the thyristor conducts. When the firing angle is 0 degrees, the thyristor conducts immediately after the zero crossing, resulting in full wave rectification. In contrast, a firing angle of 180 degrees means that the thyristor conducts halfway between consecutive zero crossings, leading to half wave rectification. By varying the firing angle, the power delivered to the load can be controlled, thereby adjusting the output voltage or power level of the circuit.

   Firing angle control finds extensive applications in devices like motor speed controllers, power supplies, and electric heating systems. By manipulating the firing angle, the average power delivered to the load circuit can be varied, allowing for efficient motor speed regulation, fine tunable temperature control, and other desirable functionalities.

Common Misspellings for FIRING ANGLE

• diring angle
• ciring angle
• viring angle
• giring angle
• tiring angle
• riring angle
• furing angle
• fjring angle
• fkring angle
• foring angle
• f9ring angle
• f8ring angle
• fieing angle
• fiding angle
• fifing angle
• fiting angle
• fi5ing angle
• fi4ing angle
• firung angle
• firjng angle

Etymology of FIRING ANGLE

The term "firing angle" is derived from the combination of the words "firing" and "angle".

The word "firing" comes from the Old English term "fyrian", which means "to supply with fuel" or "to light or kindle". The usage of "firing" in the context of machinery or electrical engineering refers to the initiation or activation of a process or operation.

The word "angle" originates from the Latin term "angulus", which means "corner" or "angle". It signifies the geometric concept of the space between two intersecting lines or surfaces.

When combined, "firing angle" refers to the specific angle or position at which a device or system, often in the domain of electrical engineering, initiates or activates a process through the supply of fuel, current, or energy.

Plural form of FIRING ANGLE is FIRING ANGLES