How Do You Spell DRAWBORE?

Pronunciation: [dɹˈɔːbɔː] (IPA)

The word "drawbore" refers to a woodworking technique that involves pulling a peg or dowel through a hole to align two pieces of wood. It is spelled as "D-R-A-W-B-O-R-E" with the primary stress on the second syllable. The initial "d" and "r" sounds are pronounced separately, while the "a" sound in the second syllable is pronounced like "aw". The "bore" part is pronounced like "bor" with a silent "e". In IPA transcription, it can be written as /ˈdrɔːbɔːr/.

DRAWBORE Meaning and Definition

1. A drawbore is a woodworking technique that involves intentionally offsetting or misaligning the holes in a mortise and tenon joint, which are then pulled together with a dowel or pin. When using the drawbore method, a hole is drilled through the tenon, and then one is also drilled through the corresponding mortise, but in a slightly different location. This intentional offsetting causes the joint to be tightly pulled together when the dowel or pin is inserted.

   The purpose of a drawbore is to strengthen and tighten the joint by creating a clamping force. As the dowel is driven in, it forcibly pulls the tenon into the mortise, closing any gaps or looseness in the joint and increasing its overall rigidity. Additionally, the misalignment of the holes prevents the joint from slipping or becoming loose over time, making it especially useful for constructing sturdy structures or joinery that require long-term stability.

   Drawboring has been used in traditional woodworking for centuries and is still employed by professional woodworkers and craftsmen today. It is often seen in timber framing, boat building, and other forms of traditional carpentry. By incorporating this method into their projects, woodworkers can ensure the durability and strength of their joints, allowing for the creation of robust and long-lasting structures.

Common Misspellings for DRAWBORE

• srawbore
• xrawbore
• crawbore
• frawbore
• rrawbore
• erawbore
• deawbore
• ddawbore
• dfawbore
• dtawbore
• d5awbore
• d4awbore
• drzwbore
• drswbore
• drwwbore
• drqwbore
• draqbore
• draabore
• drasbore

Etymology of DRAWBORE

The word "drawbore" originates from Old English, specifically from the combination of the words "dragan" and "borian".

"Dragan" means "to draw" or "to pull", while "borian" means "to bore" or "to make a hole".

In the context of woodworking, a drawbore refers to a technique where a hole is made slightly offset to one side of the intended position. When a peg or dowel is inserted into this hole, it pulls or draws the pieces of wood tightly together, hence the name "drawbore". This technique helps create a strong joint by increasing the clamping force between the two pieces, improving stability and strength.

Plural form of DRAWBORE is DRAWBORES